What specialty drill bits are incompatible with BullseyeBore Core?

As general guidance, all specialty bits used with BullseyeBore Core must incorporate a chuck mounting shaft with a maximum diameter of 0.5” and a cutting tool head of 1” or less. BullseyeBore Core cannot support any bit or bit shaft that is larger than 0.5”, or any cutting tool head larger than 1”. It is also possible that some specialty bits that fall within these acceptable criteria may not work with BullseyeBore Core.

Please see the type or types below for specific specialty drill bits that are incompatible with BullseyeBore Core.

HOLE SAW

Hole Saw bits do not operate with BullseyeBore Core because the hole saw diameter typically blocks the projected beams. However, the BullseyeBore team has designed a unique prototype version of BullseyeBore Core specifically for hole saw bits. We may consider this as a specialty product in the future. Please contact us if you are interested.