BullseyeBore CORE SUPPORT

maintenance

BullseyeBore Core should be kept free from debris and any liquids. The best method to clean BullseyeBore Core is with compressed air or optionally with a clear microfiber cloth. 

For removal of saw dust and normal non-metallic debris, please remove the housing from the inner body and remove the batteries. Use compressed air to clean the inner body and housing. After compressed air cleaning, optionally use a microfiber cloth to gently clean the optical window in the housing and if necessary, the individual small optics in the inner body. Please use extreme caution when cleaning the inner body optics as they can scratch easily!

The internal magnet in BullseyeBore Core can attract metallic shavings and debris. Such debris should be removed as soon as possible since it can scratch and cause excessive wear to any portion of BullseyeBore Core. The most optimal method to remove metallic debris is also with compressed air. This should be done by positioning the fully assembled unit over a metallic debris connection container and using compressed air to blow the metallic debris off the unit and into the container. If metallic debris gets into the inner body or directly onto the magnet, compressed air can be used to remove it, but please use extreme caution when cleaning the inner body optics as they can scratch easily!

Always store BullseyeBore Core in a secure case such as the BullseyeBore Core protective EVA case. Please be extremely cautious of the BullseyeBore Core Product’s neodymium magnetic forces during handling, usage and or storage. For extended storage, please remove the batteries from BullseyeBore Core.